Search results

For those who have ideas to make stuff but can’t get the metal cut accurately enough, or don’t want to deal with full sheets of it there is a place you can do drawings and they cut it out and ship to you. https://sendcutsend.com/ Member @CursedH1 here has used them for several things that he’s...

We were already talking pm, I mentioned the engine killing risk of the manual LP & gave EP158 or FASS recommendation. The 24v starter is great. All the way until you have to replace it. In the military- a report I read said #1 injury of wheeled mechanics was the 165# tires on hmmwvs. The...

Here is that thread. The guy “Ant” does not like me- pretty much hates me. So I suggest not mentioning me or he might not be helpful to you. I’m good at making people mad I suppose. https://hummernetworkforums.com/threads/the-long-awaited-6-speed-review.250198/

You should be good on those parts. Be 100% clear and note every fine detail with him. That is who the other guy dealt with and was supposed to be his test bed. I will find a link for you to read. You might sign up to the other forum I post the link to and send a PM to the guy explaining...

It is almost always a clutch that causes them to wear- Unless something drastically went wrong- sbc, bbc, 6.2/6.5 etc engines that are ridiculously high mileage - when it comes apart for a rebuild and it is an automatic trans, the thrust bearings are still well within tolerance. On manual trans...

Ok, I see now. Huge difference in flow from one brand to the next. My world is the DB2- so just a street T with the side tap in 1/8” is easy. The best fittings I have seen for the ds4 tapping the fuel gauge is found doing search on places like Summit racing- I couldn’t get link to copy right...

Welcome. Excited to see your rig come together, post tons of pics please

https://real4wd.com/product/sensor-engine-speed/ Thats the 2 wire sensor that uses the ds4 crankshaft reluctor wheel with the newer timing cover where the crankshaft position sensor is normally on the ds4 engines

The T fitting for the fuel pressure gauge- you don’t want any rubber line after that T. That becomes a frequent failure point and you THINK everything is ok, however a restriction in the line occurs there. There was a “tool” at the dealership that was part of a fuel pressure test kit that...

As mentioned above- some db2 have tps and some don’t. Idk of a tps that mounts separately to one that wasn’t designed to have it. You might end up needing to swap to a civilian db2 to get it. On the engine rpm- there is a couple of options. 6.5 that have the ds4 ip (injection pump) use a...

Sounds good man. Yes- the head cracking prone 230 & much improved 250 came stock with the manual, powerglide 2 speed or the TH400 is same as far as bellhousing and such. Torque converter- idk about that. It will bolt up, but idk if the stall speed is the appropriate one to use. Make sure...

https://www.amazon.com/Mr-Gasket-1015-Rocker-Deflector/dp/B000BW8VK8/ref=mp_s_a_1_1?crid=3GZYH1E3BRD6K&dib=eyJ2IjoiMSJ9.unuf-Y1XQ5ptGbCgE5KsmbkJ_GEY_JXagPk6Nq_83J3GjHj071QN20LucGBJIEps.LOlTtD1qJERuAqC4Ypd5zU8DoBug6Ov9AkHS8L9JC6o&dib_tag=se&keywords=rocker+arm+oil+deflectors&qid=1777787808&sprefix...

Ok- here is one by David Vizard. Much if the same info. I suggest 2x speed…This dude out talks me.

When you push in the clutch- that force against the clutch fingers is forcing against the crankshaft. Imagine the transmission, clutch and flywheel all attached but no engine. The flywheel is just going to move forward from the force and the clutch won’t release. All that forward force...

I haven’t had him call me in a couple years. (844)416-2342 is his shop number. Give a call Monday & ask. Remember stock is 5/16” and FTB is 3/8”.

I can’t remember. I know guys on HML bought them. Most folks that diy the labor just gets one from amazon and saves a few bucks.

I always disassembled them for cleaning & inspection. They hen reassemble andI putting them in a small bowl of oil and used a pushrod to manually pump them up and bleed out the air. I know a ton of people who soak them for a couple days before install- so I do that also

Awesome. Stop by and post pics of it after install for us please - We don’t get to see too many p30s - kinda cool

We always did it with a cut out rocker cover- rag over top of it. Start engine and idle. Go till ticking stops and 180° to 225° depending if you wanted more power =180° or quieter engine= closer to 225°.

No matter which oil pump you get- you can use the ol die grinder and burrs or stones and make some very nice improvements on the oil flow through it. Search what was taught by Smokey Yunick. That guy lead the world in things like this. Copy how he showed to do it best you can and even your...