Search results

On the 1994 I had a pin in the Injection pump harness suddenly lose connection. Everything tested fine for continuity. But one pin wasn't making. I tried several extension harnesses and PMDs. I made up a T harness to check for juice coming back from.the PMD. When I plugged that harness...

That is the optic sensor filter. It's garbage. Throw it away and plug directly into the injection pump. Your guy told you right

Best to move it to the bumper.

Toast, toast? Or rebuildable toast?

This is a busy station right off Interstate 57. I wonder if that was the only pump like that. It's odd it happened twice. It was at least a week or 2 apart. Maybe longer. I don't remember if it was the same pump. .

At the Clifton gas station. I put 6 gallons in 2 different 5 gallon plastic cans, 2 different times. The cans have 5 gallon marks on them. That's a busy station. They were selling a lot of air. I wonder if anybody else noticed. I called and complained, but nothing came of it.

If I remember right. On the last one I replaced, I had to run a brown wire to up by the shifter someplace. It was ACDELCO or GM. But was an upgraded newer version. Ibthinkmit even came with the wire.

I think if it Bhaskar bio added, it has to have a sticker. Maybe you don't have bio added in your area.

Never heard of them

Where did you get the IP?

Is the transmission with it?

All ours says is between 5 and 20% bio

Around here we have mostly soy based bio

If you're running bio diesel, you don't have to use a lubricity additive. But I would definitely add additive to biodiesel, to keep things cleaned up

That's where to check it

What does the injection pump call for? More pressure isn't always better

Chadwick tomatoes are our favorite little tomatoes https://www.google.com/search?q=Chadwick+tomatoes&client=ms-android-verizon-us-rvc3&sourceid=chrome-mobile&ie=UTF-8

In Chicago, you could have found a pot hole to drive over

I actually had a smaller steering wheel on the 69 Impala. Forgot about that. I used to use the loader to pick it up by the bumper to change tires. One time I picked it up by the back bumper and the wheels stayed on the ground for far longer than they should. That involved a little repair work

Whatever I bought, I order the ball and socket to add to the system. As well as a flex to install in the same area. I might have posted what all I bought. Stainless wasn't much more. Definitely a lot less than doing it twice. I always try to go Stainless on exhaust. Buy once cry once. And...