Search results

Cleared codes after removing OSF and drove truck. Instead of codes 18 35 and 49, now have 17 18 35 43 and 49. Any other suggestions. JiFaire said remove filter and plug back together. Just unplugged filter from Ip and PMD is plugged into Ip. Thanks...

Thought fuel filter was leaking, it was main line from lift pump to fuel filter busted under clamp. Cut off inch and put line back on. Checked filter and clean as new also bowl clean. Bled air out of fuel filter and line. Cleared codes and drove truck. Checked codes and now have only three, 18...

your problem in concise language (ie: Cranks but won’t fire). ____________________________ Demographics: tell us about your truck and your ambient conditions: - Year: 1994______ - Truck model and class (ie: c2500) _k3500_Chevy 6.5 turbo_______ - Automatic or Standard __auto________ -...

your problem in concise language (ie: Cranks but won’t fire). ____________________________ Demographics: tell us about your truck and your ambient conditions: - Year: 1994______ - Truck model and class (ie: c2500) _k3500________ - Automatic or Standard __auto________ - Mileage...

found fuel filter leaking, could this be letting air in fuel line? Would filter leaking cause truck to lose power while pulling 27 foot camper? Everything seems to be working will have to change coolant temp. sensor cause plug is broke and wires not tight on sensor. Small crack in wastegate...

Have never seen service throttle light come on. Only light that comes on and stays on is service engine soon light on right side of instrument panel. It stays on until engine is turned off. No other lights come while driving down road. Tires on truck are what came on truck when bought. Replace...

did all of the above. Batterys almost new. Can hear lift pump running after clearing codes and driving truck again. Have almost new tires all LT225/75R16 and pull camper in Drive not overdrive and in 2wheel drive not 4wheel drive. Could oil pressure switch be going bad cause it runs lift pump...

Cleared all codes and drove truck. Checked codes again and same codes pop up. Cleaned all grounds and have new batterys. Alternator charging 14 volts plus. Someone said that oil pressure switch may be bad cause it runs lift pump also. While checking codes could hear lift pump running. Same guy...

truck runs fine when not hooked to camper. when hooked to camper, loosing power and transmission doesnt wont to shift into high gear. Pull camper in Drive. Steady flow of fuel at tee bleeder valve with motor running so lift pump is running can hear it. Changed PMD 2 weeks ago and remote mounted...