Search results

Found it using Google in the other forum: Fuel Tank Sock: AC Delco: TS1012 OEM:GM 25055272

What is your definition of "higher than normal"? Diesel needs to run a little hotter than usual. Unless it goes well beyond the limit, then you are probably ok with 195 t-stat.

You replaced a lot of parts, did you put in ACDelco or OE GM from stealership parts?

Did you put the diesel sock? The diesel sock should be good but sometimes people replace it with gasser sock which is problematic. A new Fuel Pick up kit comes only with gasser sock which needs to be replaced. As for the LP, which Carter pump model did you buy? Carter is just a brand.

6.5L Injector Socket Snap On Metric 30MM Diesel Injector Socket S6128. Price is $55 shipped via USPS Priority Mail with tracking (Continental USA only, No Alaska or Hawaii) This is $65 to $69 current price on EBay and Amazon. Payment with Paypal Personal or Venmo Personal.

F-SOL?

There is a shaft, the seal is around the shaft. It may still be outside the cover. When I replaced the HB/Crank Pulley, I gave the mechanic a "round seal with lips" in addition to the pulleys. Will said, it is called "front Crankshaft seal" It has been a while but somebody should have a...

IIRC, there is a seal behind the HB.

Not solving the scanner communication issue but since you are worried about transmission. How is the Transmission fluid condition? Sometimes, transmission problem arises from neglected fluid or even low level.

IIRC, Leroy have videos for that part. You may want to check his channel on YT.

@Rodd, I sent you a PM.

It is not GM if everything is easy. 😉

When I did mine, I just find a Youtube video on it. It is the same for gasser or diesel. Follow their direction. Not sure if yours has been modified then you need to post picture on what is the current situation.

Did you put in ACDelco parts?

JMHO. There is no such thing as the most reliable battery. You can buy battery from the same mfg or brand, sometimes it is good for a long time, sometimes it is short lived. The objective here is to buy it from a place where you have access to replace under warranty wherever you are.

Did you connect the extension cable correctly? There are orientation on those cable but it is not clear on the extension connector. Where did you buy the cable and PMD from? The tricky one is the extension cable and some Dorman PMD have been known to be DOA or now working properly even when new.

There are almost no 6.5L diesel in the salvage yard anymore. During one of the previous president (the name start with "O"), they have a program called "Cash for Clunkers". During that time, a lot of these trucks were destroyed and pressed for metal.

So did you swap the 57mm from 230 to the working alternator?

Yes, that is true. You loose the advantage of the better alternator.