Search results

Hey guys, I figured I would post here to maybe find some help searching for some parts my son wants for his 68 C10 truck. I though maybe some of you all might have access to local junk yards that would have older rigs. He is wanting to try and return it to as much as factory as he can, but...

Hey guys, I just watched a video where they 3D printed bushing and motor mounts out of TPU and they held up perfectly fine. TPU is thermal poly urethane, a form of rubber that is widely used on a lot of things. I was amazed at how things held up and wondered if others have heard of this...

My son's 68 chevy doesn't have power steering and he really want it installed. I have done a conversion on an old 67 before simply by installing a box pump and brackets from a 70 model which all was a direct bolt up mod. his truck has an aftermarket AC installed which kinda hinders this. I...

Hey guys, working on my son's 68 Chevy C10. the 3 speed manual trans has a Mr Gasket brand part number 7667 floor shifter installed. these are NLA as far as I can tell. replacing it with a Hurst equivalent is expensive. The shifter has gotten sloppy and the center arm locating pin will...

Hey guys, I know I can ask on the trailvoy forums but I'm not a member there "yet" as I had posted in another thread we had the battery go bad on us. the battery was dated June of this year and somehow got smoked to where it would not take a charge. this was a couple weeks ago. I since...

How many of you folks ever experience the signal housings cracking or breaking at the screw holes on these rigs? weather it's due to age or fitment, I have broken my fair share of them! On some of the fancier rigs you sometimes find those have a steel chrome trim ring which helps with this but...

I've put together some links from the jungle site for fittings needed to add a permanent mounted fuel pressure gauge to a DS4 IP. keep in mind that your FFM has the fuel inlet hose routed underneath the intake and this hose is a pre-formed hose. this process will require you to pull this...

Guys. I have been noticing a mysterious tapping or light knock while using acceleration that seems to come and go randomly. When it starts happening I just let off the go pedal and get back into it and it seems to go away. Might have mentioned it before in another thread but today I decided to...

Guys, I wanted to see what is the better line wrench / socket for getting at the line nuts at the back of the IP. planning on pulling the valve covers soon on the 93 to check rocker buttons since I am getting a random ticking / knocking on acceleration that comes and goes. I have a trip...

Guys, I have had it on my mind wondering what would happen if I decided to take one of my two trucks and parted it out to make the other a better unit. giving this thought I'm now wondering which one of the two I have holds more value and which is more sought after. I had thought the 93...

Has anyone recently had issues posting photos from their phone? I recently upgraded my phone from a iPhone 10 to an iPhone 15 pro and now every photo I take and try to post I get a message saying the file size is too large! I’ve tried looking in my phone settings and even tried editing...

Anyone have experience with the 93-94 digital heater controls? recently my hot cold control had gone haywire. I thought I had it fixed messing with the actuator motor, but it's acting up again. tried to move the control from cold to hot and after a couple of seconds the screen just starts...

Guys, I just ordered a small ultrasonic cleaner to try and clean up a hand full of 6.5 injectors I have, most are gummed up and have varnish on them. I did try them on an engine I have on a stand by pulling the IP line up enough to just test it out of the engine. some popped and some didn't...

Hey fellas. Today I started going through the original FFM in an attempt to install it back on the 93 truck. Cleaned it up nicely but now I’m trying to make sure the fuel heater is good. I ohmed it out and get no reading on my meter. I have 4 other fuel heaters to play with so I tested each...

I need some input on where to start. on my 93 truck the trans has been shifting hard from 1st to 2nd after it's warmed up. when cold it shifts fine. a little back story: This truck had it's trans rebuilt back in 2018 by the PO, at the time I purchased it, the trans only had about 2k miles...

On my 93 I have been letting my youngest son drive it around to get some practice on larger vehicles. one thing he said was how much stiffer the throttle pedal is compared to all the other vehicles we have including my 95 truck. when I first got it on the road I too noticed right away how...

Guys, I decided to pull my 95 into the back driveway and check and adjust if needed for a quick and dirty alignment job today. I have noticed since I had pulled the TT hearing tire tread road noise more so that it had before. looking at my tires I found that both the front tires were...

Today I was thinking about looking at what it would cost me to round up all the parts needed to get the AC working in my 93 since as we say it here in Texas, "Were about to step off from hell's front porch". I put a parts list together and here is what I have so far, as to my knowledge the AC...

I want to try and lighten the amount of pressure the throttle pedal needs and was looking over everything, after our long trip the one thing I noticed is my left foot would feel like it was falling asleep over the amount of pressure I had to keep on the pedal. I used the cruise control most of...

Guys, my 93 has developed a noise that I need some help identifying. It's a high pitched banging noise that almost sounds like something to do with the flex plate. I double checked to make sure the front pulley and HB were doing ok, they both seem fine. I have a fear that ether the flex...