Search results

Welcome to the forum Mr. Clopek. Intakes is not a bad job to get removed. If You could do some test fitting and then get an AN swivel fitting that has the port with 1/8th inch pipe threads, then, screw jnto that port a barb fitting, run out a remote hose and install another barb fitting into...

I love it. If I was there I’d get out my electronical etching device and start scratching them into the corncrete wall. Then color um in wit duh pencil. I wonder if that was close to caveman language ? ? ? ? 😹😹😹

Once that slave is shoved to the BH, on the ones I worked on , there is no adjustment. IIRC, there may have been a plug to inspect that the push rod engaged the bearing fork okay.

I like that tool. Biggest problem, hydraulic clutches give any way to adjust for free pedal.

Leaving it hang pan side down and pulling the pan keeps residual oil in pan from leaking through the engine and creating a terrible bad mess. No matter if the pan is drained, still plenty enough oil to make a lot bigger mess.

Seems that install a clear 1/4” fuel hose on the return system, fire it up and ready to roll. 😹😹😹😹 Get a cheap HF engine stand, hang it, dint roll it over, pan side down then Pull the pan and then pull the heads. Heads most likely are cracked between valves. Also, from what I read a lot about...

I like to add a drain plug kit while I have them removed. First and last of the great transmission pan removal messes. 🤷😹😹😹

A long time friend, on his 45 cu in Harley. Getting it ready for its first road trip, asked him, hows the brakes, his response, brakes is for beginners, lets ride. 😹😹😹 Yeah, he was dragging his feet to get stopped. He had taps tacked to his boots. In the dark sparks would fly.

P oil. Kind of like yuhr uh nation. 🤷😹😹😹

That is one thing that I really miss. The smell of burning coal.

Timing chain/sprocket set and an oil pump/pan gasket and it’ll go anothe 150,000 without having to mess with those. At 123,000 its due for at the least the timing chain/sprocket set amd a coolant pump too while You got it offt.

And how fast you want Your truck to go is entirely dependent upon how fast You want to spend Your money. 😹😹😹

Urethane

I would sometimes burn copious amounts of cardboard then listen for the roar. Yup Thar she goes. 😹😹😹😹

Yup. A while back through this forum I was lead into the nickel base anti seize and so started using that on anything stainless steel.

And when pulling GPs if there are any that seems difficult then stop, do not go any farther. Order in that GP removal tool that Leroy makes and sells. Every 6.2/6.5 owner should be equipped with one such tool. I have always run AC Delco GPs even when I was meching for the DOT over here and have...

Thats the thing to do. Just because the injectors are acting out dont mean that they are bad. Pull those injectors and get them to a reliable shop, or, there is one member in here that does check, test and adjust injectors. I for some reason cant remember His handle/name. Oh yeah...

Yeah, that would be the simplest. I’m already a member in three social media sites and IDK how many groups. Several Jesus type groups and several HD groups along with a couple or three old pickup truck groups. I’m also a member in the gmsquarebody forum, the hdherd forum #hdherd and I am most...

Getting better. 14.45 is about what I’m getting with My K3500 CC LB with 4:10s and auto.

Come to the conclusion that, its just the nature of the beast, or, pop the rocker covers, valve springs and install new valve guide seals. The good ones, the posi seal units. Then I think that blue smoke on a starup will greatly decrease. That is oil thats burning off the tops of the pistons...