Search results

THIS IS A GENUINE GM DIESEL ENGINE SPEED SENSOR FOR 6.2 AND 6.5 DIESEL ENGINES, PART NUMBER IS 7849305. THESE UNITS ARE CURRENTLY DISCONTINUED FROM GM AND ALSO HARD TO FIND IN THE AFTERMARKET. $275.00 SHIPPED IN THE US

Yea my P400 has some etching like that in the same place, not sure what it meant.

Yes I found one, I may have an extra now, I'll have to look.

Sorry Chris, I didn't fully comprehend your statement before I replied. Oldtimers disease.😂

This block is a Peninsular Marine block, so where did they get their blocks when this block was made? So is it an early 506 gm block without piston squirters?

Can anyone decode the "G186" casting on the PS side of the bell housing?

That's what I thought Chris but there is no Navistar diamond in the valley.

I know this is a bit of an old thread but the build date info that Missy posted got me here so I figured I'd just post this here. So I have a 6.5 Navistar block built in November 4th 2010 with a steel forged crank just rebuilt with .020 18:1 Mahle pistons. What's it worth in todays market?

So you had a 599 block in your 1993 from the factory not a 506 block correct?

Has anyone ever seen a 506 block without piston squirters? I have a 506 block without piston squirters, I thought all the 506 blocks had squirters but I guess I am wrong. Check out the picks and let me know what you can tell me about this block guys. Thx

From what I recall when going to 4 wheel disc you had to switch to a 4 wheel disc brake master cylinder and proportional valve which I believe the easiest swap is the 3500 HD master cylinder and the HD proportional valve. I was not sure of the hydro boost, I will be installing a 2001 14 bolt...

Hey guys, I was just starting to work on my front brake conversion but I'm not quite ready to swap the rear axle to a disc brake 14 bolt unit. My problem is my hydro boost just started leaking so it needs to be replaced. My question is I know when swapping to rear disc brakes I need to swap in a...

The steel one that goes on the front side of the compressor, not the cast one behind it .It has two bolt holes that bolt onto two water pump bolt studs.

Admin please delete this post.

I'm looking for the front Ac compressor/ vacuum pump bracket if anyone has one LMK, Thx

LIKE THE TITLE SAYS THIS IS A GM C/K SERIES TRUCK 8 WAY POWER FRONT DRIVERS SEAT BASE FOR 1995-2000 GMT400 BODY TRUCKS & SUV's $200 PLUS THE RIDE. THEY ARE OVER $300 ON EBAY. HARD TO FIND ONE THAT EVERYTHING WORKS LIKE THIS ONE.

Hey SnowDrift, do you want this filter?

The filter that is on it looks like a Car Quest 86755

Yes that part of the harness connects to the backside of the IP.

THIS IS A 3.5 INCH EXHAUST SYSTEM FROM A 6.5 DIESEL SUBURBAN, HANGERS WERE UNBOLTED FROM FRAME AND ARE STILL ATTACHED. SHOULD FIT MOST TRUCKS WITH A 6.5 ENGINE. I DON'T THINK I CAN BOX THIS UP SO IT'S LOCAL PICKUP IN FT PIERCE FLORIDA. $100.00