Search results

Your definitely dumping a lot of fuel unnecessarily.

I learned about them cold symptoms. I keep a huge jar of them chewable vitamin Cs in the cupboard. One sneeze, one cough, one feel of a scratchy throat and its to that jug of Cs. Three minimum, chew them down, several hours later, at least three more, do that three or four times and them cold...

That’ll teach people to camp down wind from a detroit diesel. 😹😹😹

I took that nice little press button switch from the Leroy Harness I have and wired it into the Air Dog Harness. I questioned the AD co if they had such a harness but they did not. I do now. 😹😹😹

Got one on the way.

Good to hear frum You, hope that the sick spell has passed. Car lift would be a splendid addition, if there’s room.

Welp, 🙏 that You are getting better.

I really like that relay harness that Leroy makes and sells. The one with the little push button switch that turns on the lift pump and makes a real nice aid in bleeding the air from new filters.

@denata How is the garage going ? ? ? ? Up I suppose. 😹😹😹😹

Yes, pressure at the inlet port of the injection pump is the best location. To mee it seems the fuel system is starving for fuel. A possibility that the IP has worn enough that it now is failing to pull enough fuel to provide the injectors with the fuel required to allow the system to pull under...

The pillar pod now in My truck has three screws affixing it to the piller and it looks mighty phine. My interior is grey so if there is some grey printing material let me know and I’ll have an order shipped in to You.

I like that. If all the gauges was the size of the smallest one, if thats a 2-1/16th then it looks like there would be room for the three I now have in the pillar pod, plus, the three thats in the three pod atop of the dash unit. Get one printed up with six 2-1/16th gauge holes, to fit the...

LP pressure Post FFM pressure, right at the IP. Not sure what I need to do to make this gauge more visible on the numbers and needle. I need to pry off that silver bezel then suppose to be able to change gauge face colors.

Yup. Looking it over and IDK whats going on with that. I need to remove the floor from that pod and see if there is any problems within the pod. I do have six foot of (IIRC) 1/4” copper tube from thd exhaust manifold to the pipe to ferrel fitting adapter. The plastic tube shows absolutely no...

Without going back through the posts. Do You have a clear line off the IP on the return nipple ? If so, is there any air flowing through that hose ?

That scene reminds me of when my brother was living on a mountain by Grass Valley California. He would build his speaker cabinets for various purposes. One style was to put the sound out there. Me and the sons was over visiting. On the Sunday before we were leaving He got the equipment set up...

The needle is barely visible. About a half a pound below the 15. And adjusted to about 12-1/2 PSI. Should be about perfect.

If You would want to pull those injectors then send them to @Rockabillyrat and have him check and adjust them, I believe a lot of that smoke could be eliminated.

Got a link for those Fosgate speakers ?

Got the snubber installed at the IP. I thought I had a pic of fron and back SUs but apparently I didnt get the switch flipped from back to front during photo op. Maybe tomorrow I’ll gettum in here. Right now I’m just too tired to go out and get them.