• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. T

    6.5 won’t start

    Again, thanks to everyone for all the input! We’ve got a lot to check out. Might be a few days before we have time too, we are farmers and got a lot of hay to make this coming week. I’ll post as soon as we’ve checked some things out. Hopefully to say that it’s started!
  2. T

    6.5 won’t start

    Thanks denata, don’t have an oscilloscope, will try with out it
  3. T

    6.5 won’t start

    Thanks for info. Got a lot of things to check. Like I said it’s my 18 year old son’s truck, he getting frustrated but I told him we’ll figure it out eventually
  4. T

    6.5 won’t start

    The wire was connected, I’ll try it with it disconnected
  5. T

    6.5 won’t start

    I’ve read about the solenoid on the ip is supposed to read something like 1.2 volts. Don’t seem to pick up any voltage on that. Using a Fluke T5-600 electrical tester
  6. T

    6.5 won’t start

    SES light does come on along with glow plugs light
  7. T

    6.5 won’t start

    There are two that go to same eye, one black and it looks like the other is brown. There is a braided cable on the other along with a black wire
  8. T

    6.5 won’t start

    I have good flow at the return line, and already checked the fine screen on the inlet, it was clean. Ground wire is screwed to top of pump. I haven’t checked pressure yet. I’m leaning towards electrical issues. Going to be busy at work all day hopefully have time to work on it more this evening...
  9. T

    6.5 won’t start

    First of all, thanks for all the feedback! We already had the PMD mounted in the bumper and it is on a heat sink. New lift pump and have good pressure coming to ip. We actually have all injection lines off at ip because we bought a used one and put in thinking the other one must be bad, no fuel...
  10. T

    6.5 won’t start

    There was 2 at dipstick and another one on one of the studs on that holds the plenum on
  11. T

    6.5 won’t start

    It’s a Chevy 97 automatic 3500, we checked all the grounds we could find. There was only 2 on the stud where the trans dipstick is
  12. T

    6.5 won’t start

    Son bought a Chevy 3500 with a 6.5 in it. Has been sitting for years, previous owner said truck just quit running, took to a mechanic and he said he couldn’t fix it. We put new pmd on it , all new engine wire harnesses from the loom out, new glow plugs and harness. It will crank but there is no...
Back
Top