Search results

It seems that would make doing the upgrades even.more desirable

Are there any good old rebuilders around?

When I torque them, I torque the stud tighter than the nut. I don't know if it does any good.

Also beware of the stud turning with the nut. I have a wrench ground thinner to get in behind this to hold the studs.

Internals of the transmission. On the 1996. I added a spin on 1 quart filter on the return line from the radiator. I think it was the top line I used a good Baldwin filter rated for transmission fluid. I mounted to the fan shroud with some stainless. I don't remember exactly how

I used to use Pledge ony guns

If they don't pop test they should be replaced under warranty. If they need anything done to them to be balanced / pressure adjusted, it should be covered under warranty with replacement injectors. If you fix new injectors, that might void the warranty

Is there any other place the wire going to the starter relay could be picking up power? @Glagulator

Ignition switch would be my first guess

I wouldn't trust any new injectors. Until I heat of a long run. of new injectors that needed nothing b when tested, I won't be changing g my mind.

There's a lot of things that won't ship to Hawaii. A lot of things with batteries won't ship

That's awesome. How do the tracks hold up? What happens if a track breaks out in the middle of nowhere? Just curious what the plan is or odds of it happening

I prefer the threaded inserts it might be hard to find one appropriate for this application

https://cunninghammachine.com/door-bushing-installation-tool/

I would go for the fuel pressure gauge at the injection Pump first. Electric lift pump next. I would Install a lift pump relay. If you ever go with a Powermaster starter, I would install a starter relay, if it doesn't have one. It seems a 1990 should have come with an electric lift pump. My...

I thought that said yes got plowed after 5 hours if heavy drinking

If you get a new set, I would have them tested and balanced regardless. I heard John Faddis may sell new injectors, already tested and balanced.

I like the small caulk tubes with nozzle extensions https://www.amazon.com/gp/aw/d/B000HBM6PE?psc=1&ref=ppx_pop_mob_b_asin_title...

My 1989 was the brick filter on the back side of the engine A lot of people cussed the brick filters. I never had an issue with mine. Changed every oil change/ 20,000 miles.

I missed that. Not sure on the year. 1988 or 1989 should have had the factory electric lift pump, so it shouldn't be to hard to plumb.