-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Turbine Doc's latest activity
-
Turbine Doc replied to the thread DS4 IP experts.Something I did not see in your timing sequence, did to have ECT above 170F commanded TDCO will not occur on a cold engine, it has been... -
Quite the interesting idea there! Excited to see.
-
Turbine Doc replied to the thread Fuel system setup.Paul I think possibly what you are seeing with the Metrium is due to shape of the fuel tank. I have the std 26 gal tank on mine, when I...
-
Turbine Doc replied to the thread Electronical Fuel Pressure Gauge.Basically an impulse pump that self regulates flow delivery rate, which can cause a mechanical gauge to pulse at low demand, it stays...
-
Turbine Doc replied to the thread Build for member John S.Who would have thunk decades after the venerable 6.2/6.5 platform was deemed a POS by all that thought they new everything; so many...
-
Thanks for the information and links @Turbine Doc . I'm still not sure I want a bowl type under the truck so I'm considering these...
-
Turbine Doc replied to the thread Fuel system setup.Here is the Vac switch info, I'm not sure if still available, Amazon showing them out of stock...
-
Turbine Doc replied to the thread Fuel system setup.Ryan same site 60 Gph filter body, a bit taller that the 45 but less $$$ 🤨...
-
Turbine Doc replied to the thread Fuel system setup.For other readers Snow & I chatted on the phone earlier today I have been on storm disaster recovery mission work again since last...
-
Turbine Doc replied to the thread Fuel system setup.I tried to post this additional comment, but time to edit had expired. OEM "socks" are washable remember Mom always said "wear clean...
-
Same for the TS1020......not sure what the difference is between these parts, they look identical...
-
Turbine Doc replied to the thread Ds4 fitting for fuel pressure gauge.Humorous & sad (for me) so many "experts" back in the day telling me FTB was waste of time when I came up with the idea, and now so...
-
Turbine Doc replied to the thread Fuel system setup.Ryan give me a holler you have my # I have been running Metrium rod for 10+ years with OEM sock which is 70 micron BTW, but I also run a...
-
if you disconnect the optic sensor and leave the CPS plugged in and it doesn't start that would lead to a bad CPS sensor, but if you...
-
Turbine Doc replied to the thread ‘98 6.5 TD stalled while driving and current no start.https://www.thetruckstop.us/forum/threads/lift-pumps-ops-operation-and-troubleshooting.6872/
