Recent content by offiedk

Thank you very much

You are correct, it is for rear diff

Yes k1500 4wd

Need help to chose a locking diff for my 6 lug gm 6.5td I dont know what model or size, but i have pictures of it See link to my google drive https://drive.google.com/drive/folders/1fW0BRQC6xc5kjCg5D0wg5-UrzNwaJxX9 Thanks

New sensor from Acdelco received and installed, finally i am getting a reading on my tester.

Yes, finale I received the new FFM from Acdelco, No more drip drip 🤪 Beer time 🍻 Plus a new maf sensor also from acdelco, now i am getting a reading on my tester😃 Succes.

How about a delphi? ac delco seems to be sold out at rockauto and summit :(

No, its still leaking a bit.

Did that last night, gave it a clean and 2 New orings 1 at the heater and 1 at the Walter sensor

At rockauto its cheaper to buy the hole housing.

I did and it looks a bit wet.

Is there a chance that the fuel heater in the fuel filter housing can be leaking. Change the o ring but it is still leaking a bit.

Thanks for all your fast responses. Just gave a rinse with some electric cleaner, no change. also on my tester it just jumps between 0-255. I just need use som more money and buy a need sensor for this old giant :)

Hi I am getting the P0103 code and i know it's the maf sensor. I have checked the wire and i am getting 12v (red) and ground (black) but i have 5v at the signal wire (yellow) when its unplugged and the engine isn't running, is that right ? (Just found out, that is correct) When the engine is...

Hi Truck Stop I need a new ujoint for my k1500 97. In the rear i have the big aluminium driveshaft and a 3.42 14 bolt diff. Could anyone point me in the right direction. Jesper BTW - Happy New Year, when you get there.