• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

MrMarty51's latest activity

  • MrMarty51
    MrMarty51 reacted to Paveltolz's post in the thread CV Axle Seperation with Like Like.
    The more I look at the pan, I’m willing to bet this dent was originally caused by member 635 from when he had this engine in his 1998...
  • MrMarty51
    MrMarty51 reacted to Will L.'s post in the thread CV Axle Seperation with Like Like.
    Probably gonna be all picky and sand it with a flapper wheel- then go the extra step and use sand paper and hand sand it linear (in Line...
  • MrMarty51
    MrMarty51 reacted to Paveltolz's post in the thread CV Axle Seperation with Like Like.
    I appreciate the concern. However, I’m not removing the whole cooling fin. I’ve done the consulting and I’m sure that removing...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread CV Axle Seperation with Like Like.
    I would hate that you would need to manipulate your chrome pan, wonder if you acquired another 6.2 pan and modified it. not with a...
  • MrMarty51
    MrMarty51 reacted to Big T's post in the thread CV Axle Seperation with Like Like.
    Don’t grind your differential cooling fin. You’ve got to assume that is also structural. Better to install a 6.5 oil pan on it. I’m...
  • MrMarty51
    MrMarty51 reacted to Big T's post in the thread CV Axle Seperation with Like Like.
    You have had so many issues going on with that truck. I thought you said that you had the lift installed? Now interference from a 6.2...
  • MrMarty51
    MrMarty51 replied to the thread 97 k2500.
    My 2000 has the forged LCAs.
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread 97 k2500 with Like Like.
    not sure about aftermarket, but I believe @Big T has scored some in the pick a part yards in the past
  • MrMarty51
    MrMarty51 reacted to djheinz's post in the thread 97 k2500 with Like Like.
    I have forged ones already. Thank you fot the good advice.
Show older items
Back
Top