-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
MrMarty51's latest activity
-
MrMarty51 reacted to dbrannon79's post in the thread How do you all get 6.2s to 300K miles with
Like.
For a Thermostat I would shoot for a GM or AC Delco one. I will let others say for the window motors and regulators. are you... -
MrMarty51 reacted to nycxjeremyy's post in the thread How do you all get 6.2s to 300K miles with Like.
Update boys, PS leak is fixed. Secondly, doing another daily parts run on RockAuto since I need new power window regulator and motors...
-
Trinary is the better route. with mine, the AC wiring was butchered up by the PO which had a toggle switch in the cab for the...
-
I do believe you should be running a trinary switch (3 wire) to send signal to a fan controller even if just an electric fan. Not the...
-
Make sure you have the right pressure switch on the compressor. mine had a clutch cut out switch which I had to trade for the iirc...
-
I will have to look at it, from what I recall I powered the ac on and one side has power on the connector. connect the non-powered side...
-
I have thought about looking for one for my son's 68 chevy. he's been thinking about installing that TH-400 but I told him other than...
-
The one I have in the 93 was used when the PO bought it. might be able to find one used on market place. even if you find one with a...
-
MrMarty51 replied to the thread Electric Fan clutch.I had to install new poly engine mounts to get the engine high enough for the fan to clear the lower fan shroud. Even then I still used...
-
@dbrannon79 which wire on the pressure switch for the a/c compressor did you splice into? I have an aftermarket pigtail for the purple...
-
Still using the Hayden one but truck had been off the road for a while. Just started driving it again last 2 months
-
MrMarty51 replied to the thread 2002 GMC 2500.I better get to saving some of the money I been earning. CC below 3500 now so getting mighty close.
-
I believe they do. iirc it can mount on the transfer case or be a separate unit with a short drive shaft to the t-case/trans. there...
-
I believe the front diff is the same between the 3/4 and 1 ton
-
MrMarty51 replied to the thread 2002 GMC 2500.Does GV list a unit that fits to the transfer case ? I’ll have to get back into their website and re check their listings.
