• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

MrMarty51's latest activity

  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    the fuel in your bottle looks clean and isn't too discolored that I can tell. as long as there is no water or particles in it or looks...
  • MrMarty51
    MrMarty51 reacted to Will L.'s post in the thread Eye connectors with Like Like.
    Wet hole is a bolt or stud that goes into a threaded hole that penetrates into a coolant passage. So in order to seal the coolant some...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Thanks but not quite sure sure what a wet hole is…But I did get the 2 lower injection line on the pump I tried to find a 12 point flare...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    I did not know it made a difference connecting the grounds on a wet one vs dry. I think in the beginning mine was connected to the...
  • MrMarty51
    MrMarty51 reacted to jrsavoie's post in the thread Eye connectors with Like Like.
    Mine were attached to the wet hole. I should have changed that. I think I did on one vehicle. But I changed it, to be the same as...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    WOW..a lot to consider my first diesel…never heard of what a runaway diesel meant thanks for the warning I’ll have to try to research...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    If your handy with installing a relay and DIYing for the lift pump, I will dig around and find the diagram I used when I did mine. the...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    Also just a word of caution. you mentioned checking for leaks with the intake off. you can run the engine with the intake off BUT...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    on the 95, no the only way to "jump" or test the lift pump is to use the PCM connector under the dash. here is where everyone will...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Okay..so I am connecting the injector lines and darkness and mosquitoes paused that got 4 tightened up…so the thought of testing for...
  • MrMarty51
    MrMarty51 reacted to dbrannon79's post in the thread Eye connectors with Like Like.
    Ask away. here or a new thread. it's pretty relaxed here and we tend to talk about anything and everything under the sun LOL
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Thanks everyone…a new question came to mind…while connecting the injector lines..should I start a new thread or just continue..still...
  • MrMarty51
    MrMarty51 reacted to ak diesel driver's post in the thread Eye connectors with Like Like.
    be a better ground if it is attached to a dry hole vs a wet with coolant hole
  • MrMarty51
    MrMarty51 reacted to Will L.'s post in the thread Eye connectors with Like Like.
    That is correct. Be sure to clean the connection points well before attaching. Inconsistent grounds create a world of headaches...
  • MrMarty51
    MrMarty51 reacted to panran's post in the thread Eye connectors with Like Like.
    Lookin back at the picture…looks like they might attach to the stud the tranny dipstick tube is attached to
Back
Top