Recent content by mr.clopek

dbrannon79 you are right Took off housing and a little rust at O ring and all flattened out! With a mirror looked like it was coming out wires! Was leaking directly above them. Thanks for your help

At any rate thank you I will give that a try Thank you for your help dbrannon79

I would of thought that the 2 wires would be the water sensor and the wires above that would be the heater which has 3 wires

Thank you for the advice dbrannon79 My factory filter housing is leaking fuel where the 2wires go in at bottom side so I am not worried about heat truck is not driven in winter I am in Nebraska and I also run a 82 Isuzu 4 cyl diesel which has no heater. I will put in # 1 if I have to...

Ok thank for your input Now if I decide to put on a 4770 remote filter base as I like the port layout of this one as opposed to the one quad star or diesel site has and can anyone tell me me will the wix 33005 filter work ok ? Looks like some of the filters with drains use a separate O...

Just trying to utilise parts I already have! With a fuel inlet upgrade from quad star and some hose I can get a remote fuel filter for little money! Thanks for your input twisted

Mine is a 93 it has the mechanical pump! Just looking for info about omitting factory fuel filter assembly and going remote with spin on filter. The one off my old Luv 4 cyl Isuzu also has a water drain. Thanks for the info though!

Like that idea of gauge! Also had another option maybe. I have left over parts off 82 Chevy Luv 4 cyl. Diesel thinking I could use the fuel filter housing off that and make bracket to mount a remote filter the micron rating on that wix filter 33128 is 10 micron and rating on factory...

Could but want to use a an with push loc Looking for info to remove fitting from pump looks like I may remove intake to do a good job job! Thanks

Want to install remote fuel filter on 93 6.5 What is procedure to access or remove inlet fuel fitting on back of db2 pump Remove intake or some form of crows foot? What goes on once factory fitting is off? AN fitting? Thanks for any advice/info mr.clopek