Recent content by hp650

I' all for that!!!!!

I bought some military 6.2's and 6.5's, I believe they were like $150 each, so I can afford to blow up 1 or two or even three!!!! We are a bunch motor heads here in the shop. We haave a guy that runs a 6.5 mudtruck with 2 turbos, they only go 1/8 of a mile, but he has not blown up his engine...

Since reading all the posts online, some of the 6.2 and 6.5 ers do not even know how to get a diesel started after changing fuel injection pumps!!! Think of all the abuse that these engines have taken over the years, no start! get the ether! It still don't start, put in more ether! You can blow...

When I serving in our US Army in Germany, I went to work for a german racing team that started to race the Porsche 934 and I was involved in the R & D of the 6 cylinder boxer fuel injected turbo. We took a normal 930 engine, turbod engine and slapped a nother turbo on to it. We had no idea how...

The only thing that the can bus is needed for is for the diagnostic link connector(J1939=3 wires into the TCM,#29,31,32) for the programming and getting the codes. The needed external tps will (3 wires#9,19,20) give the tcm all needed One wire gives the tps 5vdc the return voltage from the tps...

Today, for the 6th or seventh time I stopped @ Tractor Supply to buy feed for our goats , cows, chickens and mule, since this area is cow country, everybody stops here (ranchers, farmers and the working hands.. Lot of 2500's, 3500's and Duramax,s galore. This place has always been my research...

OK I'm gonna answer the safety first (because that is the most important.) My dually is 11,500GVW, DMV sais or I should say in florida I pay to be able to have a max load of 5900 lbs which brings me over the GVW, but that is the law according to DMV. Who am I to argue with that! Soooooo, my...

quick update, just checked the 1000 /2000 manual (techran manual "GM") for the TCM to funktion, it needs following: 1/ throttle position sensor- standalone or the pedal modified on the 98 ext cab dually to take the 2nd TPS. should be a no brainer!Nuts and bolts.. 2/ engine speed sensor is...

starting on this project and I would appretiate any and all info on it. Marriage of a 6.5 tdsl (heath cam/lifter sprgs/heath computer to the max!) with a allison 1000 pree 2004. I believe that the transmission will match the bell housing on the 6.5 (bolt holes anyone?) Torque converter matchup...