-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
DieselSlug's latest activity
-
DieselSlug replied to the thread My 2005 Yukon XL.Well, had another strange scenario last night. We were on our way home from a dinner as it was my wifes birthday. Doing about 40 slowing... -
-
That is a good idea! electro-plating with copper or nickel. using something like a long brazing rod bent into a coil and a small...
-
Maybe home plate them before installing
-
How long do factory ones last? Might be worth a few extra bucks.
-
Maybe when you get the new ones, clean them up free of oil and whatnot. then have them dipped in a high heat epoxy resin paint so the...
-
DieselSlug replied to the thread Another 6.5.Nice truck AK. My plan after im done needing 3-rows of a Suburban is to find a 90s dually diesel. Id even be ok with 2wd as I will not...
-
DieselSlug replied to the thread My 2005 Yukon XL.Been getting a lot of rotational brake noise lately. Upon further inspection my front rotors are rotting and literally delaminating...
-
-
DieselSlug replied to the thread Pole Barn Garage.Grabbed dads JD 755 and tiller. Started spreading some of the good topsoil from the spoils piles, tilling, picking the big rocks, and...
-
-
DieselSlug replied to the thread Pole Barn Garage.Got the backside swale mostly in place. Shouldn't have any surface ground water issues anymore.
-
-
DieselSlug replied to the thread Pole Barn Garage.Been hard at it trenching and re-grading due to the codes property boundary offset. Got the trench all done last night. Will be grading...
-
-
DieselSlug replied to the thread Pole Barn Garage.Pulled the sod off the new parking area. Going to need some dirt sloping off the back side to achieve somewhat level. Again, another not...
-
-
DieselSlug replied to the thread TTS site slow to load recently.Yes, it seems hit or miss on my end whether it does it or not.
-
DieselSlug replied to the thread My 2005 Yukon XL.Got the pigtail terminals cleaned with MAF sensor cleaner. Sensor is in and no leaks. We will see how it registers the next time I drive it.
-
-
DieselSlug replied to the thread My 2005 Yukon XL.So we are barking up the right tree. The plug is wet, so oil is passing through the sensor. Also found out its not OEM (white...
-
-
iirc the main issue with plumbing in a mechanical gauge was the ops port on the block is a funky metric or BSP straight thread with a...
